Hi all! Kind of a strange question. I need to photograph fish in fish tanks (they live in water contained by glass and acrylic). Do anyone have any suggestions with what to do? Lighting is often horrible in a fish store. Not sure if flash is useful? Thanks!!!

  • 2deep4u@alien.topB
    link
    fedilink
    English
    arrow-up
    1
    ·
    1 year ago

    You can purchase a flange to cover your lens and reduce glare

    I wouldn’t put filters because the light is already low in these environments and you need a faster shutter speed

    The biggest difficulty will actually be focusing

    It’s almost impossible for autofocus to work so you need to manually focus but fish don’t sit still

  • vivaaprimavera@alien.topB
    link
    fedilink
    English
    arrow-up
    1
    ·
    1 year ago

    Probe lens or periprobe lens?

    Not exactly the most inexpensive option but it’s cheaper than a custom built aquarium and diving there with an underwater camera.

  • taspleb@alien.topB
    link
    fedilink
    English
    arrow-up
    1
    ·
    1 year ago

    I think the best lighting if the tanks aren’t lit well enough would be a couple of underwater compatible led strips that you could put maybe in the front corners inside the tank and then try to block out any external light with the hoods people have mentioned but also turning off all other lights and closing blinds if appropriate.

  • mattbnet@alien.topB
    link
    fedilink
    English
    arrow-up
    1
    ·
    1 year ago

    I’ve done it (way back in the film days) reasonably successfully by being in a dark room and adding an off-camera strobe either from above or from one side.

    The big lens hood is a good idea or you can just use a jacket or blanket over your head and the front of the talk to block reflections.

  • 3nl@alien.topB
    link
    fedilink
    English
    arrow-up
    1
    ·
    1 year ago

    Through glass isn’t bad as long as it’s 90 degrees. The biggest issue is lightning - anything you preview on the camera looks like garbage because it won’t WB beyond 10kK so take a lot. Everything needs to be white balanced post. It Also tends to under expose on heavy blue so bump your EV comp a bit. Always shoot at 90 degrees and use a rubber hood.

    Shot this through 10mm glass under 18,000K lighting with cheap amateur gear: https://www.reddit.com/r/ReefTank/comments/ksmz50/macro_of_my_little_yellow_rug/

  • goldfishgirly@alien.topB
    link
    fedilink
    English
    arrow-up
    1
    ·
    1 year ago

    I photograph goldfish all the time. I have a small ring light that I keep on low and shine it above the tank and use a rubber lens hood on the glass. Then I wait. Easier to have them come to you than chase them with your camera. Lots of editing poop out of the photos but it works for me and I’ve got some great shots.

    • aprilayer@alien.top
      cake
      B
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      Yes on the rubber lens hood. Butt it right up against the glass, and because the lens hood is flexible, you can even angle the camera a very tiny bit if you need to. I use a flash on very low power handheld on a TTL cord. Wait for the fish to come to you, don’t chase. Autofocus may or may not work, all depends.

  • Deckyroo@alien.top
    cake
    B
    link
    fedilink
    English
    arrow-up
    1
    ·
    1 year ago

    Do you have the option of moving the tanks? We shoot aquascape photos in a dark room, and the lights are on the sides and top of the tanks. Dunno if that info helps.